Since you have to install compensator to choose compensator, what do you need to know after you buy compensator? Let my company tell you today. Rotary compensator

The first thing we need to do is to check the goods before we install the compensator. The second is that the sleeve of the single-ended compensator needs to be installed on the side of the material, and the compensator needs to be welded when it is installed. The welding of the groove must be handled relatively. After welding, the demonstrative pressure measurement should be carried out. The requirement of pressure measurement is about 1.5 times higher than that of normal operation. If the leakage occurs during pressure measurement, the bolt is not tightened, so the bolt should be adjusted so as not to leak. Because the installation is carried out along the central line of the pipeline, the axis used can not be greater than 1%, otherwise the noise sealing performance will be poor after a long time of friction. To prevent the compensator from moving in the work, it is necessary to add a movable support close to the pipeline when installing, while the sliding support should be well protected outside, so as not to be injured or rusted. The double compensator should be concentric with the pipeline, and be pulled up with a fixed support. At different temperatures, the compensator can be installed with the maximum length of LMAX without too much work. Tension and compression.

To sum up, you also know what you need to do after buying compensators. If you want more information than questions about compensators, you can always pay attention to us.